Sunday, September 09, 2007

Spike Tissue Holder

Since I do not own the stitch style I used, I am substituting a different spike stitch variations to what I used. There is a Spike Stitch Introduction that also will be helpful if you are unfamiliar with this stitch.
Spike Tissue Holder

Materials:
Thread Size 10 thread in 2 colors: Color 1 – black, Color 2 – pink
Hook Size 9 Steel (it has been a while since I have done this so I think this is the right hook)
Needle threader
Needle
Sewing Thread
3 Clasps


Make 2:
With color 1, Ch 62
1. Sc in 2nd ch from hk & all following sc.
2. (ch 1, turn, sc in all sc.
3. ch 1, turn, sc in all sc.
4. ch 1, turn, sc in all sc (change to color 2).
5. use directions from row (B) 7 but only for 7 times not the 8 times it says to.
6. ch 1, turn, sc in all sc.
7. ch 1, turn, sc in all sc.
8. ch 1, turn, sc in all sc.
9. ch 1, turn, sc in all sc (change to color 1).
10. use directions from row (A) 13 but only for 7 times not the 8 times it says to.
11. ch 1, turn, sc in all sc.)
12. repeat from ( to ) 3 times.
13. [ch 1, turn, sc in all sc.] repeat 12 times. With color 1 “the starting color”5. use directions from

When that is done you will have two halves, next connect the two sections with a sl st in each st across.

This joining will create a small joining bump. Get your small packet of tissues place it in the middle of your crocheted rectangle. Crab stitch along the sides the arrows are pointing to. (The red line is the sl st joining the two halves)

This is how it should look, then take the two edged and fold them over the tissue packet like you were wrapping a present. (White rectangle depicts where the tissue packet will go)


This is what you should see. Next crab stitch along the sides the arrows are pointing to. (The edges are folded like you would wrap a present with wrapping paper)

At this stage your tissue holder should look like the below picture except the middle edges pull away and you can see the tissue packet inside.

Finally you'll add fasteners with thread to the center seam so it will remain closed. I used 3, these clasps are invisible on the outside of the tissue holder. The red dots show the placing I used for the clasps. (The clasps should be attached on the inside of the tissue holder)

This is picture of clasp that is similar to what I used.

Your tissue holder should look like this now but the spike stitch pattern will be different.

This is the book that I borrowed that has the Spike Stitch pattern that I used for this pattern. If you have this book or can borrow this book, below is the pattern you use with it .
Make 2:
With color 1, Ch 62
1. Sc in 2nd ch from hk & all following sc.
2. (ch 1, turn, sc in all sc.
3. ch 1, turn, sc in all sc.
4. ch 1, turn, sc in all sc (change to color 2).
5. ch 1, turn, sc in next 4 st, *Spike Stitch in all indicated stitches, sc in next 7 sts*, repeat from * to * 6 times, sc in last 4 sts.
6. ch 1, turn, sc in all sc.
7. ch 1, turn, sc in all sc.
8. ch 1, turn, sc in all sc.
9. ch 1, turn, sc in all sc (change to color 2).
10. ch 1, turn, sc in next 8 st, *Spike Stitch in all indicated stitches, sc in next 7 sts*, repeat from * to * 6 times, sc in last 8 sts.
11. ch 1, turn, sc in all sc.)
12. repeat from ( to ) 3 times.
13. [ch 1, turn, sc in all sc.] repeat 12 times. With color 1 “the starting color”
Next go up to the top of this page and follow the rest of the steps.

3 comments:

Mimi said...

Thanks for sharing, Ashley...your diagrams are a big help! I would love to try this soon :)

Linda said...

I love this pattern. I have made a few other types of tissue holders. This one is very creative.

Sometimes I miss things when reading instructions.

I can't see where from rows 5- 9 there is a change back to color 1. row 4 says change to color 2 and then row 9 says change to color 2 and I can't see where before row 9 there was a change back to color 1.

Help!


4. ch 1, turn, sc in all sc (change to color 2).
5. ch 1, turn, sc in next 4 st, *Spike Stitch in all indicated stitches, sc in next 7 sts*, repeat from * to * 6 times, sc in last 4 sts.
6. ch 1, turn, sc in all sc.
7. ch 1, turn, sc in all sc.
8. ch 1, turn, sc in all sc.
9. ch 1, turn, sc in all sc (change to color 2).

blueyes_crochet said...

Linda,
Ok thank you for bringing this to my attention. I believe in row 9 the color should be color 1 not color 2. Let me know if that helps if not I'll remake the tissue holder and figure out where the problems is.

9. ch 1, turn, sc in all sc (change to color 1).